
This section describes the emergency format procedure which you can
use to format your internal memory in case something happens and
you can not get into your MP3 Player program to format from there.

1. Turn off Portson.
2. Hold down top button (Volume Up) farthest from stereo jack.
3. While holding down volume up button,
      press and hold down power button for about 2 seconds.
4. Make sure your device is in Boot Mode, 3 quick flashes on LED then a pause.
5. Run the PyroFormat program on the Palm.  The PyroFormat.PRC file is located
     in the 'C:\Program Files\PocketPyro\Palm OS\Format' folder.
6. Select either Format 32 for 32MB Portson units, or Format 64 for 64MB Portson units.
7. Format takes around 1 minute per 32MB.
8. When format completes, connect Portson up to PC with USB cable.
9. When Portson appears as a removable drive, copy all the files from
     the 'C:\Program Files\PocketPyro\Portson Programs' folder to the Portson.
10. Remove USB cable, wait about 10 seconds.
11. Connect Portson up to PC again with USB cable.
     The LED should be blinking with 2 quick flashes followed by a pause.
     You should now be able to use the desktop software to put
     secure audio files onto the Portson.

To format your SD card, do the followings:
1. Connect your PortSon (with the SD card inserted) to the PC via USB cable.
2. Double click on My Computer, and find the PortSon listed as a removable drive.  Right mouse click on this drive, and choose Format.
3. Select the format options you want and click Start.

Important:
1. Always pause 4-5 seconds between attaching and removing the USB cable!
2. Turn on Portson before plugging in USB cable.
3. Check www.pocketpyro.com for updates, new applications, and skins for your PortSon!
4. Do not power up the Portson with the USB cable attached to PC.
