
NOTE: This is only required if you have an AUSTAR LNB fixed to your dish.

After having no luck with the ihug supplied drivers I downloaded 
the  sm200d_linux_text_v2.0 tarball from the telemann website and made a 
modification so that the driver would support the Austar LNB configuration.

cwd to ./app/text/
rm ./SkyData
Edit ./app/text/SkyData.c
Change the value of #define MAX_LO from 11000 to 11300
Make (to compile the new binary)
cp ./SkyData to where you have the drivers installed.

SkyData.ini should have Local Oscillator set to 11300.
restart the driver "skymedia restart" (not sure if its necessary.. but I 
expect it is)

Our LNB used to use 13V with the Telsat Turbo card, so we're using "V" as 
our setting in SkyData.ini

Everything seems to be working just fine at the moment *touch wood* 